Re: [cobalt-security] IDE RAID1

["David Thacker" <Cobalt@xxxxxxxxxxxxxx>]

Malcolm,

Do you use the ARCO Duplidisk in your RaQ server, and if so, which RaQ model
and which Duplidisk model?

I have been thinking about stuffing the Duplidisk Direct into my RaQ3, but
wanted to know if anyone else has actually done this first.  I'm pretty sure
there is physical room in there for the second drive and the Duplidisk
controller.

Thanks,

dAvid tHacker

> Re IDE RAID1
> we use Duplidisk which is the only hardware IDE RAID1 i know of
> it writes the bytes to two drives simultaneously
> if one drive fails the other carries on regardless, but a buzzer sounds
> warning you that a drive is down and a light shows whether its primary or
> secondary
> you can then replace the dead drive with any other IDE (they don't even have
> to be the same spec!)
> and remaster either on the fly or in another pc with a DOS boot diskette
>
> they cost about $250 plus the second drive, but I reckon they the next best
> thing to StaQware ;)
> Which I think you can still get from http://www.octree.co.uk
>
>
> ----- Original Message -----
> From: Jeff Lovell <jlovell@xxxxxxxxxx>
> To: <cobalt-security@xxxxxxxxxxxxxxx>
> Sent: Friday, August 25, 2000 9:45 PM
> Subject: Re: [cobalt-security] No password needed to login as admin bug
>
>
> > Rod Todd wrote:
> > >
> > > Hello, when we telnet or use the browser interface to
> > > our Qube2 if put admin as the login and for password
> > > hit enter (return) we automatically login as Admin;
> > > i.e. we did not enter anything for the admin password.
> > > We tried this from a different machine and it works
> > > from there too, what is going on and how do we fix
> > > this since we have a long password which also works
> > > (if used).  Please help.
> >
> > Sounds like someone has used the password reset button
> > on the front of the RaQ.  You should go to
> > Users->Administrator and set the password.
> >
> > > Also what is the best way to add storage space to a
> > > Qube or Raq for disk mirroring?
> >
> > For a RaQ.. Buy staqware ;)
> >
> > Otherwise if you don't need a standby systems.  You
> > can get a second hard drive and set up software RAID.
> > It can be quite a chore though.
> >
> > Jeff
> >
> > --
> > Jeff Lovell
> > Cobalt Networks, Inc.
> >
> > _______________________________________________
> > cobalt-security mailing list
> > cobalt-security@xxxxxxxxxxxxxxx
> > http://list.cobalt.com/mailman/listinfo/cobalt-security
> >
>
>
>
> _______________________________________________
> cobalt-security mailing list
> cobalt-security@xxxxxxxxxxxxxxx
> http://list.cobalt.com/mailman/listinfo/cobalt-security
>